Sand two grits in a single pass with a 25×2 Double Drum Sander. Featuring INTELLISAND® Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor, allowing you to significantly reduce the amount of time you spend sanding.

Need a larger machine? Check out the 37×2 Drum Sander.

Features:

• INTELLISAND^® Technology: Automatically adjusts conveyor speed
  based on load to prevent gouging and burning.
• Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor, guaranteeing flatness to less than .010 across the width of the sander.
• Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter and thinner.
• Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loosening, and overlapping.
• Self-cooling drum prevents overheating and extends abrasive life.
• Optional Casters Available

Specifications:

• Drive Motor (TEFC): 5 HP, 1 Phase
  
• Power Requirements: 208-230V, 60Hz; 1 Phase, 30 Amp Service; 3 Phase 20 Amp Service
• Maximum Width (in): 25″
  
• Minimum Length (in): 3-½″
  
• Maximum Thickness (in): 6″
  
• Minimum Thickness (in): 1/32″
  
• Drum (Extruded Aluminum): 5″ x 25″
  
• Drum Speed: 1740 RPM
  
• Dust Hood (Steel Hood, Hinged At Back): (2) 4″ Vacuum Ports, Min CFM: 1000 Recommended
  
• Ball Bearing (1″): 4 sealed and permanently lubricated
  
• Conveyor Motor: 100 in. -lb. torque, direct drive D.C. motor, ranged variable, 0-15 FPM
  
• Casters Included: No
  
• Cord & Plug Included: No
• Assembled Dimensions (H x W x D): 43″ x 46″ x 31″
  
• Shipping Weight: 475 lbs
  
• Shipping Dimensions (L x W x H): 50″ x 44-½″ x 44-½″