all

Product Details The DustFX CWI-DAC1200 is a 3-speed air cleaning system built to assist in keeping the workshop clean of very small floating dust p...

The new Laguna Fusion line was developed for demanding woodworkers. Designed around quality components with an emphasis on superior dust collection...

2 Sitka Spruce (picea sitchensis) pieces, each: 81cm x 2cm x 3mm (31.9" × .79" × .12") minimum.Tight grains, no structural defects.Kiln dried, curr...

1 piece: 1.5mm thick x 40mm square (0.06" x 1.57" square).Premium quality Mother of Pearl. ** CANNOT BE SHIPPED TO USA **  

1 Machined Indian Rosewood End Pin with Mother of Pearl dot.  Get the F-3603 matching Bridge Pins.High Quality, Made in Japan.

1 Bone End Pin High Quality, Made in Japan.      

1 Ebony End Pin.High Quality, Made in Japan.

1 piece Rosette for Acoustic Guitars -- 0.05" (1.27mm) thick. 3.6" (92mm) inside diameter 5.2" (132mm) outside diameter

One piece, size: 0.12" thick x 0.157" wide x 21.25" long (3mm thick x 4mm wide x 540mm long) * Note * Dimensions may vary, as these items are mad...

Absolutely the best, easy to grab, non-stick mixing surface available! Great for mixing MasterTint into your CA products! Made of quality, super d...

Now, no repair area is impossible to reach with our GluBoost Pinpoint + Extender Kit! Finally, youve got the ideal GluBoost GluDry accessory for e...

VINTAGE: Brown, Yellow, Amber Revolutionary new product! Finish your work in flying colors! Complete, spot-on color control for your repairs a...

Orange Veneer, size: 0.02" thick x 3.9" wide x 33" long (0.5mm thick x 100mm wide x 850mm long)

Full-size Blueprint for Old Gibson® A style Archtop Mandolin.

Oneway Easy-Core Coring System 16  1/4" Knife set with Carbide Cutter.The Easy-Core Coring System utilizes a unique method of supporting the cuttin...

Oneway We've had several pen turners approach us about an accessory for the Live Center which would be better suited to turning pens. It needed to ...

Wood Turning Using Vacuum. This clever piece of machinery is the key to a good vacuum system. It allows a vacuum to be drawn through it while preve...

Replacement Tip for Trent Bosch Radius Scrapers. Size corresponds to the diameter of the tool bar. Standard Grind vs. Negative Rake Grind The negat...

#2 Serrated Stronghold Chuck Tower Jaws  Each of these jaw sets contain the following items: Jaws (4) M6 x 14 (8) Made in Canada.

Spigot Jaws for Oneway Talon Chuck.Chucking capacities of the Talon Chuck with Spigot Jaws: - External (compression): 3/8" minimum, 1-5/8" maximum ...

Wheels, bearings and housings will last longer, your grinder will make less noise, finishes on your tools and projects will be improved with le...

Crown Tools Set of 20 TPI Thread Chasers Developed with the help of Bill Jones, these tools come with a helpful instruction brochure. Thread chasi...

Carbide tip assembly for converting Trent Bosch Total Access Hollowing Tools from High Speed Steel to carbide. Easy to Replace. Instructions for r...

The Rivolver Tool Rest system allows users to match up the correct tool rest with the users project, and the lathe it is to be used on. Rivolver of...

#2 Profiled Talon & Oneway Chucks Tower Jaws Piece Name Minimum Maximum Spigot (external) 1-1/2" 2-5/8" Recess (internal) 2" 3-3/8"

#3 Serrated Stronghold Chuck Tower Jaws  Each of these jaw sets contain the following items: Jaws (4) M6 x 14 (8) Made in Canada.

These jaws are aluminum plates machined from a solid (for greater strength). Their unique combination of slots and tapped holes for mounting the ru...

Manufacturer / Min-Max External Compression Internal Expansion Oneway Min 3/8" 1" Oneway Max 1-7/8" 2-1/2" Talon Min 3/8" 7/8" Talon Max ...

Why buy a Template?This allows you to quickly and easily turn the matching taper on your handle in order to accept the Thread-Lok ferrule.As it is...

Thread-Lok FerrulesUse these great innovative new ferrules to make your own turning tools!These ingeniously designed ferrules allow you to use your...

Pro-PM turning tools are the "elite" of all turning chisels.  Made from an advanced Particle Metal, the molten steel has been compressed and sinter...

Pro-PM turning tools are the "elite" of all turning chisels. Made from an advanced Particle Metal, the molten steel has been compressed and sintere...

English size is 1/4 across flutes. 3/8 is dia. of steel.  Pro-PM turning tools are the 'elite' of all turning chisels.  Made from an advanced Parti...

The Jumbo Jaws for the Oneway Stronghold Chuck can be used for either internal or external chucking of platters and light finishing of bowl backs. ...

Oneway 4" Carbon steel No-Flex Faceplate 1" - 8 TPI RHHigh Quality, Made in Canada.

Oneway 3" Carbon Steel No-Flex Faceplate 1" - 8 TPI RH Its small size makes it extremely versatile, as it fits large or small lathes.Manufactured f...

Oneway Easy-Core Coring System 13" Knife set. The Easy-Core Coring System utilizes a unique method of supporting the cutting arm during the coring ...

1 Purpleheart (peltogyne spp) block.  Size: 8" x 8" x 2" (20.3cm x 20.3cm x 5.1cm) No structural defects.You will receive a similar looking piece.R...

Cocobolo (Dalbergia Retusa) Pen Blanks Size: 6" x 3/4" x 3/4" No structural defects.Kiln dried, currently at 10% moisture content. Natural

Size (each): 0.8" x 0.8" x 6" (2 cm x 2 cm x 15.2 cm)Premium figure.No structural defects.Roughsawn.Kiln dried, currently at 10% moisture content. ...

Product Details Introducing the all new Stallion CWI-B1005 10" Bench-Top Band Saw – the ultimate tool for woodworkers seeking precision, power, and...